Latest News

NEW approvals for ProTech 30

by sentrydoors | Jul 1, 2014 | Latest News

Enhanced glazing and approvals for feature grooved face designs are contained in the latest ProTech 30 Global Assessment (Rev B) now available from the tech library.

NEW ProTech Global Assessments now available

by sentrydoors | May 9, 2014 | Latest News

New ProTech Global Assessments are now available in the tech library. Our revised GA’s include enhanced approvals for ProTech 30 and ProTech 60, please check out the tech library for details.

Another successful test for ProTech

by sentrydoors | Apr 25, 2014 | Latest News

MDF faced ProTech samples have been successfully tested to BSEN 1634: Part 1, the test was intended to improve the range of approvals for ProTech 30 and included larger glazed apertures, intumescent seal options ( Lorient & Pyroplex ) and grooved design...

ProTech Thermal Performance Reports

by sentrydoors | Feb 13, 2014 | Latest News

NOW AVAILABLE from the Tech Library: The U-Value for Sentry ProTech 60 is 1.6 W/m2K, please refer to the Tech Library for details.

ProTech Acoustic Performance Reports

by sentrydoors | Feb 13, 2014 | Latest News

NOW AVAILABLE from the Tech Library

FSC ProTech NOW IN STOCK!

by sentrydoors | Jan 16, 2014 | Latest News

« Older Entries

Next Entries »

Products

The Small Print

The technical evidence provided by this website (www.sentry-doors.com and www.sentrypanelproducts.com) is the property of Sentry Panel Products Ltd and it’s use is restricted to customers of Sentry Panel Products Ltd or their customers only. If you are not a customer of Sentry Panel Products Ltd and require further information regarding the technical capabilities of our products or need to check to ensure that you have permission to use any of the evidence provided here, please contact Sentry Panel Products Ltd (info@sentrypanelproducts.com) who can assist. It is the on-going policy of Sentry Panel Products Ltd to invest in testing in order to ensure that the products supplied comply with current legislation and meet the latest standards.